Open Ended Timing Belts are linear extruded thermoplastic polyurethane (TPU), reinforced with high strength reinforcement cords. They are available in imperial and metric pitches and in a number of tooth shapes. Our standard product is made with polyester thermoplastic polyurethane, however polyether polyurethane is also available on request.
Our belts are made with several reinforcement options, however our standard product is made with Zinc coated steel cords.
Nylon can be added to the tooth and conveying side of the belt, providing benefits such as low noise and reduced slip stick on the tooth side and easy glide benefits on the top side for accumulation and conveying applications.
Anti-static facings are also available for use in applications where an electrical charge build-up would be detrimental to the product conveyed or the application environment.
TPU belts can be cover fabricated with a wide range of elastomers and machine-modified to meet the exact need of your application. Additionally, cleats can be added to the conveying side of the belt for production separation and sortation applications.
|Tensile Member / Cord Code||Properties / Application|
|S = Steel||Zinc coated steel / standard construction|
|K = Kevlar®||Non-magnetic for use in drives with metal detectors / Food Industry|
|HP = High Performance||+25% more strength capacity than standard steel cord / High repeatability applications|
|HF = High Flexability||Can accept smaller pulley and idler diameters than standard steel cord / Multi shaft drives with severe reverse bending|
|HPF = High Performance & Flex||+25% more strength capacity than standard steel cords but are more flexible than HP cords / Suggested for high performance and multi-shaft drives|
|SS = Stainless Steel||-25% less strength capacity than standard steel cords / Suggested for drives where water or moisture are present.|
|T2.5||Metric Trapazoidal||White||92 Shore A||20 mm||S||Polyester Polyurethane|
|T5||Metric Trapazoidal||White||92 Shore A||150 mm||S, K, HP, HF, SS||Polyester Polyurethane|
|T10||Metric Trapazoidal||White||92 Shore A||150 mm||S, K, HP, HF, HPF, SS||Polyester Polyurethane|
|T10 Wide||Metric Trapazoidal||Clear||92 Shore A||500 mm||K||Polyester Polyurethane|
|T10 W/O Gap||Metric Trapazoidal||White||92 Shore A||75 mm||S||Polyester Polyurethane|
|T20||Metric Trapazoidal||White||92 Shore A||150 mm||S, K, HP, HF, HPF, SS||Polyester Polyurethane|
|White||92 Shore A||50 mm||S||Polyester Polyurethane|
|White||92 Shore A||100 mm||S, K, HP, HF, HPF, SS||Polyester Polyurethane|
|White||92 Shore A||150 mm||S, K, HP, HF, HPF, SS||Polyester Polyurethane|
|AT10 W/O Gap||Modified Metric
|White||92 Shore A||100 mm||S||Polyester Polyurethane|
|White||92 Shore A||200 mm||S, K, HP, HF||Polyester Polyurethane|
|MTD3||White||92 Shore A||50 mm||S||Polyester Polyurethane|
|MTD5||White||92 Shore A||50 mm||S, K, SS||Polyester Polyurethane|
|MTD8||White||92 Shore A||100 mm||K, HP, HF, SS||Polyester Polyurethane|
|MTD14||White||92 Shore A||115 mm||S, K||Polyester Polyurethane|
|RPP5||Parabolic||White||92 Shore A||75 mm||S, K, SS||Polyester Polyurethane|
|RPP8||Parabolic||White||92 Shore A||100 mm||S, K, HP||Polyester Polyurethane|
|RPP14||Parabolic||White||92 Shore A||150 mm||S||Polyester Polyurethane|
|STD5||Black||92 Shore A||50 mm||S||Polyester Polyurethane|
|STD8||Black||92 Shore A||85 mm||K, HP, HF||Polyester Polyurethane|
|MXL||Imperial Trapazoidal||White||92 Shore A||0.5 in.||K||Polyester Polyurethane|
|XL||Imperial Trapazoidal||White||92 Shore A||2.0 in.||S, K, SS||Polyester Polyurethane|
|L||Imperial Trapazoidal||White||92 Shore A||4.0 in.||S, K, SS||Polyester Polyurethane|
|H||Imperial Trapazoidal||White||92 Shore A||6.0 in.||S, K, SS||Polyester Polyurethane|
|H Wide||Imperial Trapazoidal||Clear||92 Shore A||20.0 in.||K||Polyester Polyurethane|
|XH||Imperial Trapazoidal||White||92 Shore A||6.0 in.||S, K, SS||Polyester Polyurethane|
*Belts can be slit in any width from the maximum extruded width